دانلود ETABS Version 9.7.3

 

ETABS Version 9.7.3
http://forum.civilea.com/Thread-etabs-9-7-3
Size: 98 MB
بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

ETABS MODELING



• Object Based Graphical Interface
• Model Templates for Most Steel & Concrete Building Systems
• Models Created Using Building Terminology
• Beam/Column/Brace Frame Objects
• Wall/Slab/Deck Shell Objects with Internal Meshing
• Story Definitions using the Concept of Similar Stories
• Common Labeling of Objects between Similar Stories
• Complex 2D and 3D Shear Walls Interacting with Beams & Columns
• Integrated Graphical Section Designer for Complex Frame Shapes
• Editing with Move, Merge, Mirror and Replicate
• Accurate Dimensioning with Guidelines and Snapping
• Rigid, Semi-Rigid and Flexible Floor Diaphragm Definitions
• Powerful Extrusion Command for Generating Ramps
• Auto Line Constraints for Mismatched Wall Meshes
• Quick Draw Options for Object Creation
• Draw Command for Easily Adding Openings to Floors
• Support for Multiple Coordinate Systems
• Powerful Grouping and Selection Options
• Automatic Generation of Code Lateral Wind and Seismic Loads
• Automatic-Permutation of Wind Directions and Eccentricities
• Transfer of Loads from Decks/Slabs to Beams and Walls
• Vertical Area Loads in Any Shape or Configuration
• Cracked Properties – Property Modification Factors
• Gravity, Pressure and Thermal Loading
• Wind Loading on Open Structures
• Sequencing Allowing Adding or Removing Objects/Loads/Supports
• Buildings with Base Isolation and Inter-Story Dampers


ETABS ANALYSIS


• Static/Dynamic Analysis for Frame and Shear Wall Buildings (N, P)
• Response Spectrum Analysis with Eigen or Ritz Vectors (N, P)
• P-Delta Analysis (N, P)
• Automated Center of Rigidity Calculations (N, P)
• Rigid, Semi-Rigid, Multiple and Flexible Floor Diaphragms (N, P)
• Frame Objects Drawn as Members – Automatically Meshed (N, P)
• Automatic Meshing of Decks/Slabs for Diaphragm Analysis (N, P)
• Wall/Slab/Deck Modeled with Shell, Plate or Membrane Types (N, P)
• Applied Force and Ground Displacement Loading (N, P)
• Seismic Acceleration or Displacement Time History Analysis (N, P)
• Wind Load Forcing Functions (N, P)
• Explicit Panel-Zone Deformations (N, P)
• Effects of Beam-Column Partial Fixity (N, P)
• Construction Sequence Loading Analysis (N)
• Frame Hinges for Axial, Flexural, Shear & Torsional Behavior (N)
• Nonlinear Static Pushover Analysis (N)
• Viscous Dampers (N)
• Base Isolators (N)
• Gap Object for Structural Pounding (N)
• Nonlinear Time History Analysis with the Wilson FNA Method (N)
• Large Displacement Analysis (N)
• Sequential Construction Analysis (N)

SEQUENTIAL CONSTRUCTION (N)
• Model Effects of Construction or Demolition
• Specify Active Structure by Stories or Groups
• Geometric Nonlinear P-Delta and Large Displacements
• Sequential Construction Load Cases for Design
• User Defined Loading

PUSHOVER ANALYSIS (N)
• FEMA 273, ATC-40
• Force-Deformation Relations for Steel & Concrete Hinges
• Modal, Uniform, or User Defined Lateral Load Patterns
• Capacity Spectrum Conversions
• Effective Damping Calculation
• Demand Spectrum Comparisons
• Performance Point Calculation
• Summary Reports including Plastic Hinge Deformations

ETABS DESIGN


• Steel Frame Design for AISC-ASD & LRFD, UBC, British, Canadian,
Italian and Euro Codes
• Concrete Frame Design for ACI, UBC, British, Canadian, New
Zealand, Indian, Mexican and Euro Codes
• Composite Beam Design for AISC-ASD & LRFD, British and Canadian
• Concrete Shear Wall Design for American, British & Canadian Codes
• Automated Steel Joist (K or KCS) Selection
• Design for Static and Dynamic Loads
• Floor Vibration Analysis with Murray Damping
• Automatic Calculation of Moment Magnification Factors
• Automatic Calculation of K-Factors & P-Delta Effects
• Steel Frame Design Offers Automatic Member Selection
• Seismic Requirements for Special Moment-Resisting Frames
• Automatic Tributary-Area Live Load Reduction
• Graphical Section Designer for Complex and Built-Up Shapes
• Special Moment Beam Types for Steel Frames
• Virtual Work Based Optimization for Lateral Deflections
• Camber and Stud Requirements for Composite Beams
• Grouping for Design Envelopes
• Designed for Biaxial-Moment/Axial-Load Interaction
• Seismic Check of Beam/Column Joints in Concrete Frames
• Automated Effects of Panel-Zone Deformations on Lateral Drift
• Doubler Plate and Continuity Plate Design
• Seismic Design for Concentric/Eccentrically Braced Steel Frames
• Display of Reinforcing for Columns, Beams and 3D Shear Walls
• Shored and Un-Shored Design for Composite Beams

http://www.csiberkeley.com
http://hotfile.com/dl/126649014/6910229/ETABSv973StandAlone.part1.rar.html
http://hotfile.com/dl/126649019/4baa71d/ETABSv973StandAlone.part2.rar.html
http://www.filesonic.com/file/1658310764/ETABSv973StandAlone.zip

ETABS Version 9.7.3 FULL

Size: 309 MB
http://www.filesonic.com/file/1658859034/ETABSv973FullCD.zip
Mirror Links:
Stand Alone
http://www.enterupload.com/ox7wajz2kyk1/ETABSv973StandAlone.zip.html
http://www.filesonic.com/file/1660831764/ETABSv973StandAlone.zip
http://10upload.com/708pmu7j9j2u/ETABSv973StandAlone.zip.html
http://ifile.it/z8wfuyh/ETABSv973StandAlone.zip
http://www.mediafire.com/?4zc1pzpxr9nnh5g
http://www.megaupload.com/?d=IXGDV76T
http://cramit.in/nqgytqvww6pf
Full CD
http://www.enterupload.com/s1kkuhntqyee/ETABSv973FullCD.zip.html
http://www.filesonic.com/file/1660802804/ETABSv973FullCD.zip
http://10upload.com/oecf3s0ri75d/ETABSv973FullCD.zip.html
http://cramit.in/pkbasicr5yec

Size: 468.98 KB
بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

CSI Multi products license generator with the usage of ETABS 9.5 worked on it

PACKAGE LIST:
csimp.exe - Generator itself.

lsc.exe - used by generator. No need to start separately.
lsco.exe - used by generator. No need to start separately.

*.lic - generated license files. Naming is automatic from selected prduct, date and fingerprint. To use rename to "lservrc".

cgen.log - log file from generator. Can be deleted safely at any time.
newcodes - license log file from generator. Can be deleted safely at any time.

read.en.txt - this file.

USAGE:
1. Select product.
2. Enter yout localcode (fingerprint from echoid/wechoid).
Select license expire date (WARNING!!! 1 year max).
3. Generate your license file (it took few seconds - just wait confirmation for generator).
4. Rename generated file to "lservrc" and copy to corresponding program dir.

COPYLEFT:
sverox (RTKTEAM)

MED.link
http://hotfile.com/dl/126692460/32c76ec/CSI_ETABS973.rar.html

Standalone installation for CSiXRevit 2009 and 2010

Size: 1.03 GB
http://www.filesonic.com/file/1668742274/CSIxRevit_ETABS_V970.zip
Download the Standalone installation for CSiXRevit 2009 and 2010

admin ; ٤:٤۱ ‎ب.ظ ; ۱۳٩٠/٥/٢٧